Adhesives, Mastics & Coatings

Adhesives

Glasstack 25 by Polymer Adhesives

Glasstack 25 is a slower tacking water based insulation adhesive specially formulated for extrusion coil lines, rotobonders and spray applications where a fast dry time is not desirable.

Glasstack 35 by Polymer Adhesives

Glasstack 35 is a medium tack time, high solids insulation adhesive specially formulated for spray, brush or roller applications where high coverage rates are required with excellent bond strength.

Ticki-Tuff Spray Grade by Robson Thermal

Ticki-Tuff Spray Grade, (Water Base) is an HVAC duct liner adhesive, black in colour, and easy to clean-up. It has a very mild odour which makes it ideal for fabrication shop use. Insulation can be re-positioned before adhesive is dry, won’t clog up spray equipment, and is freeze/thaw stable.

Ticki-Tuff Brush Grade by Robson Thermal

Ticki-Tuff Brush Grade, (Water Base) is an HVAC duct liner adhesive, black in colour, and easy to clean-up. It has a very mild odour which makes it ideal for fabrication shop use. Insulation can be re-positioned before adhesive is dry, clings to the brush to reduce drips and clean-up and is freeze/thaw stable.

Mastics

Bakor 110-14

Bakor 110-14 is a solvent-type asphalt mastic vapour barrier coating designed to provide superior vapour barrier and weathering characteristics. Adhesion and chemical resistance are excellent. Available in spray, trowel or airless spray grades, it is used as a heavy-duty coating over rigid thermal insulation on tanks, lines and equipment where operating temperatures are below ambient summer temperatures. May also be used with heated equipment where thermal insulation is dry during application and the coated face is not subjected to temperatures above 95°C (203°F). May be used as a bedding compound for cavity wall insulation where a vapour barrier is required.

Robson RT-10

Robson’s RT-10, Robson’s Mastic (Water Base) is a white or grey breather mastic, that is durable, fast setting, bridges cracks, is fibrated, elastomeric, and used for all fibre and foam insulations, indoors and outdoors, and costs less than PVC, canvas, or metal bevels and end caps. It is freeze/thaw stable and you can use RT-10 to finish insulation bevels and end caps instead of using PVC or metal. May also be used to coat and protect insulated pipe fittings, and insulated ducts, vessels and tank roofs and is an instant and permanent adhesive for making pipe insulation fittings such as elbows and tees, freeze/thaw stable as well.

Polymer Adhesive's Air-Lag

Air-Lag is a water based adhesive coating that dries to a tough, durable, UV protective film. Its flexibility has been engineered to handle surface expansion and contractions caused by extreme weather conditions.

Coatings

Bakor 120-09

Bakor 120-09 is a white, fire resistive resin emulsion insulation lagging coating, which dries to a tough, flexible, weather-resistant finish. Resistant to water, mild acids, alkalis, petroleum solvents and salt solutions, and when combined with heavy glass cloth or canvas, excellent puncture resistance is achieved. May be factory or field tinted to meet special colour requirements.

Robson White Lag

Robson’s White Lag (Water Base) lagging adhesives is ideal for fabrics, indoor finish for FSK foil jackets, and edge sealants for HVAC duct liner. It has a lower odour and easier to clean-up than other lagging adhesives it is freeze/thaw stable and is also thicker than other lagging so mixing is not required. White Lag is ultra white colour brighter and whiter than any other lagging so it matches PVC fittings.

Robson RT-80

Robson’s RT-80 Duct Seal is a unique, solvent based, fibre reinforced, elastomeric sealant. It is designed to seal joints and seams in HVAC air ducts and plenums including metal, glass fiber duct board, flexible ducts, and plastic to prevent air leaking out, and water or dust leaking in.

Bakor Duck Seal

Bakor Duct Seal is a polymeric emulsion based duct sealer supplied in a heavy brush consistency. It is used to prevent pressure loss on joints and seams on metal duct work of air distribution systems with pressures up to 30 cm (12") of water.

Polymer Adhesive's Airseal 22

Airseal 22 is a UL 181 A-M & B-M listed fast drying water based duct sealant with excellent adhesion, formulated to pressure seal all types of HVAC duct systems, including sheet metal, fiberglass duct board and flexible duct.

Polymer Adhesive's Airseal 33

Airseal 33 is a UL 181 A-M & B-M listed fibre reinforced water based duct sealant used to pressure seal all types of HVAC duct systems, including metal, fiberglass duct board and flexduct.